Blog Detail
Bottom side adhere striped slags
Reason:Focus point too high;Gas pressure too low
Solutions:Reduce focus point;Improve gas pressure
The bottom section appears white
Reason:Focus point too high;Nozzle position height too low;Gas pressure too high
Solutions:Reduce focus point;Improve nozzle height;Reduce gas pressure
The bottom appear yellow
Reason:Focus point too high
Solutions:Reduce focus point
The bottom adhere drop-shaped tiny slag
Reason:Cutting speed too fast;Focus point too low
Solutions:Reduce cutting speed;Improve focus point
Corner adhere slags
Reason:Focus point too high
Solutions:Reduce focus point
Cutting gap increase
Reason:Protective lens dirtied
Solutions:Clean/replace protective lens
Cutting surface appears yellow
Reason:Gas impure;Gas tube mixed with air or Oxygen
Solutions:Checking Nitrogen and purity,required 99.99%;Checking gas tube;Checking delay
If you want to know more about our machines or need any help , please send email to sales@xc-laser.com
XC-Laser . Mr. Tom Song
Related Blogs
-
Welcome to Jinnan Xing Chuang Laser Equipment Co.,Ltd / XC - Laser . -
Real Photo of Our Laser Cutting Machine Workshop -
2 Chucks Tube Cutting Machine , 3 Chucks Tube Cutting Machine , Tube And Plate Integrated Laser Cutting Machine -
Pulsed laser cleaning machine is a new type of efficient and environmentally friendly cleaning equipment in the current industrial field. With its unique technical advantages, it has gradually replaced traditional cleaning methods such as sandblasting, chemical agents and mechanical polishing, and b
