Blog Detail
In actual production, if section delamination occurs during high-power laser cutting of stainless steel, it will not only affect the cutting quality but also make subsequent processes difficult to carry out. XingChuang Laser has summarized the common causes and corresponding solutions to help you quickly locate problems and adjust parameters accurately.
Common Causes
1. Cutting speed is too fast, resulting in slag not being discharged in time;
2. Excessive heat input leads to unstable molten pool;
3. The laser focus position is negatively deviated, resulting in uneven energy distribution.
Optimization Suggestions
1. Properly reduce the cutting speed to improve the surface finish of the section;
2. Reasonably control the light output frequency or duty cycle to avoid heat accumulation;
3. Adjust the focus position to the optimal state to ensure concentrated energy.
After making adjustments according to the above steps, the delamination phenomenon of the cutting section will be significantly improved, and the cutting effect will be more ideal.
XingChuang Laser, focusing on high-quality laser cutting solutions. For more application skills or equipment parameters, please feel free to contact our technical team!
Related Blogs
-
Welcome to Jinnan Xing Chuang Laser Equipment Co.,Ltd / XC - Laser . -
Real Photo of Our Laser Cutting Machine Workshop -
2 Chucks Tube Cutting Machine , 3 Chucks Tube Cutting Machine , Tube And Plate Integrated Laser Cutting Machine -
The continuous laser cleaning machine is an efficient and environmentally friendly industrial surface cleaning equipment. With the advantage of non-contact cleaning, it has gradually replaced traditional processes such as sandblasting and chemical cleaning, becoming the mainstream choice for industr
